Layer fila ni fɛn wɛrɛw materiel product,ka replace de siɲɛ fila processus.
Pikiri kɛ waati kelen na walima pikiri kɛli cɛmancɛ la walasa ka se gradient effect ma.
Adapt ka fana dilan kelen kulɛri fɛn,ka mutil-diversity baarakɛcogo ni baara di.
Optimized design of screw and barrel,ni plasticizing seko ni baarakɛcogo ɲuman.
Pikirikɛlan ka ɲɛminɛcogo fila taabolow.
| PARAMETER (PARAMETER) ye | INITE | HMD170-DM2 ye | HMD218-DM2 ye | ||
| diɲɛ seleke naani hakɛ jateminɛni | -- | 282/90 | 587/170 | 445/130 | 873/218 |
| PIKILI ƝƐNABƆLI | A | B | A | B | |
| Pikiri hakɛ(teori) . | cm3 ye | 129 | 276 | 215 | 471 |
| Pikiri girinya(PS) . | g | 117 | 252 | 196 | 423 |
| oz | 4.1 | 8.9 | 6.9 | 15.1 | |
| Pikiri kɛcogo hakɛ | g/s | 98 | 140 | 113 | 192 |
| Vis diamètre (kurunba) cɛmancɛ | mm | 32 | 42 | 38 | 50 |
| Pikiri kɛli tansiyɔn | MPa | 219 | 202 | 207 | 186 |
| Vis L/D hakɛ | -- | 22:1 | 21.8:1 | 22:01 | 22.2:1 |
| Vis (kuru) sɔgɔli | mm | 160 | 200 | 190 | 240 |
| Vis vitesse(sens pas) . | r/min | 0-300 | 0-243 | 0-259 | 0-240 |
| UNITÉ DE CLAMPING (KƆRƆBƆLI ƝƐNABƆLI). | |||||
| Kɔrɔsili fanga | kN | 1700 | 2180 | ||
| Moule Da wulicogo | mm | 450 | 510 | ||
| Falan hakɛ | mm×mm ye | 710×690 | 780×780 | ||
| Dist.cɛ kravati baraw(H×V) . | mm×mm ye | 480×460 | 530×530 | ||
| Max.tile yeelen | mm | 970 | 1060 | ||
| Moule ka bonya(Min-Max) | mm | 180-520 | 200-550 | ||
| Ejector (Ejector) ka sɔgɔsɔgɔninjɛ | mm | 140 | 140 | ||
| Ejector ton hakɛ | kN | 50 | 50 | ||
| POWER UNIT (FƐN ƝƐNABƆLI). | |||||
| Jiko sitɛmu tansiyɔn | MPa | 16 | 17.5 | ||
| Pompi motɛri fanga | kW | 18.7 | 23 | 17.5 | 17.5 |
| So funteni-minɛn fanga | kW | 8.5 | 17.7 | 18.3 | 31.3 |
| Temp control zones hakɛ | -- | 3 | 5 | 9.6 | 22.6 |
| MƆGƆ WƐRƐW | |||||
| Tulubɔlan seko | L | 260 | 530 | ||
| Masina hakɛ(L×W×H) | m×m×m | 4.9×2.2×2.1 | 5.5×2.1×2.1 | ||
| Masina girinya | Ton | 6.8 | 8.9 | ||
Tags hot .: pikiri kɛcogo ɲɔgɔndan masin, Sinuwa pikiri kɛcogo ɲɔgɔndan masin dilannikɛlaw, feerekɛlaw, izini
